Beogram 4002 Type 5513: Reinstalling the Floating Chassis Components

I have all of the restoration parts I need for this Beogram 4002 (Type 5513) turntable now.

It is time to reinstall the floating chassis with the tangential arm assembly back into the Beogram 4002 cabinet.

First the Beolover replacement suspension lock bushings are installed on the floating chassis.

Then the suspension locks are placed in the cabinet base.

The floating chassis is placed over the locking bolts and the rest of the locking mechanism is installed.

With the floating chassis and its components reinstalled I can finish the wiring to the new reservoir capacitor assembly.

...and install the Beolover restored platter motor.

This Beogram can now be moved to the test bench where I will install the circuit boards and control panel. Then I can start going through voltage checks and service manual adjustments.