Featured Post

Beogram Commander Remote Control: Maybe This is the Final Version!..;-)

This is a follow up to my recent post about the redesigned Beogram Commander remote control board, which now works in both (DC-motor) Beogr...

Beocord 9000 Restoration

This is a list of my posts about the Beocord 9000:

Beocord 9000: First Contact and Installing New Belts

Beocord 9000: Restoration of the Peak Program Meter with SMD LEDs (I)

Beocord 9000: Restoration of the Peak Program Meter with SMD LEDs (II)

Beocord 9000: Restoration of the Peak Program Meter with SMD LEDs (III)

Beocord 9000: Peak Program Meter Scale Illumination using a Red/Green LED

Beocord 9000: Display Restoration with SMD LEDs

Beocord 9000: Replacing the Incandescent Indicator Light Bulbs with SMD LEDs

Beocord 9000: Replacing the RAM Battery

Beocord 9000: Repair of a Broken Out Leaf Spring in the Tape Mechanism

Beocord 9000: Exchanging the Rubber Parts in the Tape Mechanism

Beocord 9000: Repairing a Cracked Clutch Arm

Beocord 9000: Repair of a Broken Out DIN-7 Jack With 3D Printed Inserts

Beocord 9000: Total Recap - Replacement of all Electrolytic Capacitors


5 comments:

  1. Are you in US? My 9000 suddenly loads the cassette jammed forward on the right side and won't turn. I'm looking for someone who can repair it.

    ReplyDelete
  2. yes....in Tampa, FL...just send me an email or use the contact form on the right.

    ReplyDelete
  3. I got 3 Beocord 9000 and a newer version was shorted accidentally years
    ago. Could I send in for repair?

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. Which parts will need lubrication after change of idler wheels and belts?

    ReplyDelete

Comments and suggestions are welcome!