Today is the big day. It is time to pack up the Beogram 8000 and ship it home to its owner. The turntable has been playing beautifully the last few days with very heavy use and no signs of any intermittent behavior. It was definitely a good thing to install a brand new phono muting relay.
After all of that work it is important to properly pack units up for shipping. Especially turntables. A loose item here or there can cause extreme damage. Everything must be locked down and secure.
Bang & Olufsen has long been using a floating chassis for their turntables and provide a chassis lock down mechanism for transporting them. On the Beogram 8000 (and 8002) there are three lock down bolts under the main platter. The bolts are screwed down out of the way when the turntable is ready to be used. For transport the bolts are backed out and through a mounting plate. When through a hole in the mounting plate, the plate is slid over and the bolt is tightened against it so the floating chassis cannot move.
This lock down should be performed even if transporting the turntable in your vehicle to deliver it yourself.
The phono cartridge should also be removed from the tonearm at this point. To secure the tangential arm assembly and the top platter, B&O provided a special molded styro-foam piece. It holds the top platter securely and slides onto the deck of the Beogram with a tab to block the tangential arm assembly from moving.
The dust cover lowers on top of the platter packing to protect the dust cover and to hold the platter down so the sub-platter cannot move.
The outside of the Beogram is then protected with a soft, foam sleeve.
Finally, two molded styro-foam blocks slide over the front and back of the Beogram to lock all of the packing in place.
The Beogram and shipping material is placed into its original box which is inside an outer box that has thick foam protection on all sides.
It costs more of course but please don't ever skimp and not use an outer box. That is just asking for trouble. The only time to use just the original box by itself is if you are hand delivering the unit.
The final step is sealing the shipment and applying the shipping label. Then off it goes.
Featured Post
Beolover SyncDrive: DC Platter Motor Replacement for Beogram 4002 and 4004 (Type 551x and 552x)
Late Beogram 4002 and the 4004 (Types 551x and 552x), which have DC platter motors instead of the earlier synchronous AC motors usually suff...
Showing posts with label double boxing. Show all posts
Showing posts with label double boxing. Show all posts
Thursday, July 13, 2017
Wednesday, May 13, 2015
Beomaster 8000: Shipping Damage - Return Trip in a Double Box
Finally, it is time for the return trip for the damaged Beomaster 8000 that did not make it back well to its owner. I made the mistake to trust the original B&O packaging and did not insist on double boxing. This did not go well. Some ruffian must have dropped the package and a cracked uProcessor PCB and erratic performance resulted. Furthermore, and I am not sure if this was related to the shipping accident, my fix of the missing control panel lid spring retaining metal clip turned out to be unstable. The Beomaster sent out a piece of shrapnel and the spring broke out. I fixed this with a 3D printed insert. After fixing all this I put the Beomaster in our living room and embedded it into my Beosystem 8000 to test it for a few days to see if there are any intermittent issues. All this went well, and so I decided to try shipping again.
This time, however, I double boxed it using industrial HD packing foam that I cut to size to create a 2 inch foam cocoon around the original B&O box. The HD foam is perfect for slowing down the deceleration during impacts, while giving solid protection.
The outer shell is a double strength 12x24x36 box that I adapted to be 14 inch high to accommodate the additional foam layer on top. Here are a few pictures. I definitely recommend to make this extra effort whenever shipping one of the heavier B&O units. And this Beomaster 8000 definitely qualifies as heavy! The total package weight is about 70 lbs. Like a nice sack of cement, if you ever carried one up a few floors, you know what I mean...;-). If there is no original box available, a 10x20x30 box and some more HD foam is perfect as inner box.
I usually put some cardboard in between the foam layers to add some resistance to penetration:
Putting the Beomaster in:
I put a sheet of polyurethane foam on top to protect the surfaces a bit better:
This original box had some nice spaces to put the cord:
Here comes the double layer of foam on top
And an additional cardboard shield:
Folding the flaps over:
Due to the open area in the center I added yet another cardboard sheet and then about one roll of tape around everything:
And that's it! Let's try this again. I hope this trip goes better! Fingers crossed! May the FedEx man find some Beolove in his heart this time...;-)!
Subscribe to:
Posts (Atom)

















