Featured Post

Beolover SyncDrive: DC Platter Motor Replacement for Beogram 4002 and 4004 (Type 551x and 552x)

Late Beogram 4002 and the 4004 (Types 551x and 552x), which have DC platter motors instead of the earlier synchronous AC motors usually suff...

Showing posts with label turned. Show all posts
Showing posts with label turned. Show all posts

Saturday, November 19, 2016

Beogram 4002 (5501): Installation of New Aluminum Pulley for the Carriage Servo

A few weeks ago I finished up the restoration of a Beogram 4002 (5501). The only item missing was a new aluminum pulley for the carriage servo. As usual this unit had a cracked pulley that was wobbling quite a bit, and that caused some noise and vibration when the carriage was driven fast like during start or stop. Absolutely not beolovely!

Unfortunately, the normal pulley design that Nick provides for my restorations of these Beograms does not work in the early 5501 types since they have a unique end groove detection mechanism requiring a pulley with four holes that act as optical chopper to detect the speed of the carriage. If it gets fast, and the end groove switch is activated the STOP sequence is activated and the arms travel to the home position. 

I already replaced the light bulb of this mechanism with a LED based fixture, and now I was finally able to add the proper pulley. Nick just sent me a few redesigned pulleys for the 5501 type. Here is an impression of the new pulley together with the original cracked one:
This shows it installed together with my LED based illumination setup:
And since it looks so beautiful (at least in the eyes of the Beolover...;-), here is a photo of the setup in action:
And after playing a few records with the new pulley, I am happy to report that it works very well. The holes are in the right position and they have the proper diameter to be able to trigger the end groove detection mechanism. So this baby may be close to go on its trip home back to the UK! But I will still play it a bit more to make sure that there are no intermittent issues left before it goes on its long trip.

This is what is playing right now:
And an impression from the inside of this lovely gatefold cover:
My Gabor Szabo and Chico Hamilton collection is growing rapidly. This is just amazing stuff. Cannot get enough! Must go buy more shelves for more records!...;-)





Thursday, June 2, 2016

Beogram 4000: New Aluminum Carriage Pulley

After electroplating all the spring terminals in the switches with gold, it was time to give this Beogram 4000 one more update: A new aluminum carriage pulley to replace the old wobbly plastic pulley. Here is an impression of the original pulley:
And here with one of Nick's beautiful aluminum pulleys!:
I would be happy to get you in touch with Nick if you would like to get a pulley for your own Beogram. They are also available for the 4002 and 4004 versions. This is Beolove!


Sunday, January 10, 2016

Beogram 4002 (5523): Replacement of a Wobbly Carriage Pulley with a New Aluminum Unit

After pretty much finishing up the Beogram 4002 (5523) that I am restoring right now I gave it a good playing this afternoon and I quickly realized that the carriage made stressed noises when moving fast such as when returning to the home position after paying a side. This meant that the carriage pulley had issues. And indeed, it turned out that it was cracked like so many of them. It seems the old plastic just cannot hold up to the stress put on it by the setscrew and so it cracks over the years to relieve it. Luckily there is Nick (of Beoworld.com) who provides nicely turned aluminum replacements (I'd be happy to put anyone interested in touch with him). It is amazing what difference it makes if the pulley is centered and runs round.

This shows the old cracked and the new pulley side by side:
And this picture shows the new pulley installed. Pretty, isn't it??:
Now the carriage moves smoothly without excess noises. This is Beolove!