Beogram 4002 (5513): New Arrival from Arizona - A First Look

I recently received a Beogram 4002 (Type 5513) from Arizona for a complete functional restoration. The unit arrived without its hood. It came in a Beolover shipping container. An excellent approach for trouble-free shipping. 

This is the unit as extracted from the packaging:

A bit dirty, but overall not too bad, except for the completely worn keypad:

I hope we will soon be able to professionally restore these keypads. On the positive end of things, the plinth is in a pretty good condition. The corners are almost pristine:

I removed the aluminum plates and had a look below deck:

This unit looks mostly unadulterated, a perfect starting point for restorations. There are fragments of decayed transport lock bushings all over the place, nothing unexpected in this vintage:

As usual the plastic pulley on the carriage spindle is cracked and my customer said he glued it to the shaft (shudder!...;-). It will be interesting to remove it from the shaft for installing an aluminum replacement. The belt definitely also looks 'end of life':

I was told this unit did some traveling in an RV for a few years (that is what I call 'roughing it'!...;-). Maybe this is the reason that the floating chassis springs are pretty rusty:

This is nothing really worrisome, just looks a bit, well, rusty!...;-).

After this first inspection, I plugged it in and pressed START. The carriage sluggishly started moving and the arm found the LP setdown point and - nothing! No solenoid action. I pressed STOP and waited for the return of the carriage to its home position. Then I manually operated the arm lowering mechanism a few times and tried again. This time the solenoid acted. So it seems there are just the usual hardened lubricants at play, and a thorough cleaning and re-lubricating should do the trick. The DC platter motor made some noises while the above happened. This is also not unexpected. These motors usually have dry bearings and they need to be re-infused with oil before the deck can be used again.

In summary, this is a pretty decent starting point for a full restoration, and I expect this Beogram will soon play like-new, and hopefully also look like-new after installation of a refurbished keypad!