Wrapping up the Beomaster 2400 capacitor replacement is just recapping the tone, filter and FM tuning board. Just eight capacitors on this board. This board also has the three slider controls that I cleaned with Deoxit fader lube.
Here is the board before replacing the capacitors.
Here is the board after the recap. As with the other boards, the seven electrolytic capacitors were way out of tolerance (50% to 100% off their value). The lone 0.22uF tantalum was fine but in being consistent with my other replacements I replaced it with a WIMA MKS capacitor.
All total, there were 58 electrolytic capacitors and 19 tantalum capacitors replaced in this Beomaster.
No comments:
Post a Comment
Comments and suggestions are welcome!