Featured Post

Beogram Commander Remote Control: Maybe This is the Final Version!..;-)

This is a follow up to my recent post about the redesigned Beogram Commander remote control board, which now works in both (DC-motor) Beogr...

Tuesday, February 5, 2019

Beomaster 8000 From Canada: Packing for shipment home

The day finally arrived to ship the Beomaster 8000 from Canada back home. All tests have passed and loose end tasks completed.

This receiver is quite heavy. The packed shipping weight can be from 57 pounds to 65 pounds depending on packing materials. I was able to get this shipment prepared at 57 pounds in a 30 inch x 20.5 inch x 12 inch box.

I glue the bottom flaps of the cardboard box together with a common wood glue.
After that I lined the bottom and sides with 1 inch thick, 2.2 pound rated, polyethylene foam. Those pieces are attached using 3M Super 77 spray adhesive. Polyethylene foam has some give to it but is sturdy enough to resist puncture. A good material for the first line of defense.





























The old type styrofoam and styrofoam peanuts are the absolute worst packing material ever devised. They should never be used!
They generate a lot of static electricity and small pieces get into everything...especially the audio component you are shipping.

Bubble wrap is not very good either. It is okay for small, light things but heavy shipments can puncture the bubble wrap leaving no protection at all.

For this Beomaster 8000 my first step in wrapping it up for placement in the shipping box is to place it inside a clear plastic bag. That will protect against any liquid and keep packing materials from rubbing directly against the Beomaster.






























Next I use 1½ inch thick eggcrate foam to wrap the Beomaster providing another layer of padded protection. This foam has more cushion than the polyethylene outer foam. I do one wrap lengthwise and one wrap crosswise.






































The eggcrate foam wraps are taped and everything is placed into the shipping box. I use extra blocks of the polyethylene foam to fill in any gaps.




























The last rectangular piece of polyethylene foam is the lid followed by taping shut the cardboard box.




























This Beomaster 8000 receiver is now on its journey back home and I hope to hear happy results from the owner after it arrives.

No comments:

Post a Comment

Comments and suggestions are welcome!