Pages

▼
Showing posts with label plug. Show all posts
Showing posts with label plug. Show all posts
Thursday, May 24, 2018

Beogram 4004 (5526): Installation of A New Output Cable

›
After replacing the light bulb in the sensor arm with an LED assembly it was time to look into the RCA plug 'conversion' of this B...
Saturday, March 17, 2018

Beogram 4000: Upgrade of Signal Path with New DIN5 Plug and a Grounding Switch

›
As usual the original DIN5 plug on the Beogram 4000 that I am currently restoring was badly oxidized. This shows the original plug: I r...
Friday, June 9, 2017

Beogram 4004 (5526): Replacement of Convertible DIN7 Plug with DIN7 Socket and an RCA Adapter Cable

›
Any restoration of a Beogram should include the replacement of the DIN connector to ensure a low impedance signal path on the way to the am...
Thursday, June 8, 2017

Beogram 4004: Replacement of Convertible DIN 7 Plug with a Female Socket and Adapter Cables

›
While enjoying the Beogram 4004 that I recently restored I was looking for an adequate modern replacement for its convertible DIN 7 plug. ...
Wednesday, June 7, 2017

Beogram 4000: A New DIN 5 Plug and Installation of a Grounding Switch

›
The Beogram 4000 that I am restoring right now had a badly corroded and poorly installed DIN 5 plug. Obviously not the original plug. Here ...
Thursday, April 20, 2017

Beogram 6000 (5512): Replacement of a Corroded DIN5 Plug with a New Gold Plated Unit

›
Practically all Beogram 4002/4 and 6000 need their DIN5 plugs replaced due to various levels of  corrosion on the contacts, which were not ...
Sunday, January 29, 2017

Beogram 4000: Replacement of Corroded DIN5 Plug and Installation of a Grounding Switch

›
After rebuilding the control cluster the next step of my current Beogram 4000 restoration was to replace the original corroded DIN 5 plug ...
Wednesday, October 19, 2016

Beogram 4002 (5501): Replacing the Original DIN5 Plug with a Modern All-Metal Gold Plated Unit

›
No restoration of a 4002 is complete without replacing the usually oxidized original DIN5 connector. Those precious low voltage signals des...
Friday, June 3, 2016

Beogram 4002 (5503): Installation of a New All-Metal DIN5 Plug with Gold Plated Contacts

›
In my opinion no Beogram 4002 restoration is complete without replacing the usually corroded original output plug(s) with modern all metal ...
Saturday, April 30, 2016

Beogram 4002 (5514): Installation of a New DIN5 Plug With Gold Coated Terminals

›
The Beogram 4002 (5514) that I am currently restoring is making progress. In my opinion a Beogram restoration is only complete with a moder...
Tuesday, April 26, 2016

Beogram 4002 (5513): Installation of New DIN5 Plug with Gold Plated Pins

›
The restoration of the signal path is only complete with a gold plated plug, and so I just did it for the Beogram 4002(5513) that I am rest...
Wednesday, March 9, 2016

Beogram 4000: A New DIN 5 Cable and a Grounding Switch

›
The Beogram 4000 that I am currently restoring had a cutoff output cable: This is already the third 4000 that I am working on that had ...
1 comment:
Saturday, January 16, 2016

Beomaster 4000 (2406): AC Current Measurements in Transformer Secondaries

›
This post is a first update on the transformer issue that I identified in a Beomaster 4000 that is in an outstanding cosmetic condition ot...
2 comments: