Pages

▼
Showing posts with label 82JGBG8000. Show all posts
Showing posts with label 82JGBG8000. Show all posts
Wednesday, December 2, 2015

Beogram 8000: Replacing the Carriage Belt

›
Another loose end in the Beogram 8000 that I am readying for shipping I needed to attend to: I earlier noticed that the carriage belt was q...

Beogram 8000: Installation of New Rubber Bumpers on the Hood and Beneath the Aluminum Lid

›
I still have a few odds and ends to clear up on the Beogram 8000 that I recently restored. While it is now playing nicely and all functions...
Wednesday, November 25, 2015

Beomaster 6000 (2253): Volume Belt Installed Four Years Ago All Cracked Up

›
I am selling a Beomaster 6000 (2253) that I fixed up in 2011. Back then the off-ebay unit had lost its volume belt and so I ordered a new o...
Saturday, November 14, 2015

Beogram 8000: Glueing the Aluminum Panels Back On

›
I still have to see a Beogram 8000 that did not have aluminum panels that came loose from the aged double sided tape that holds them in pla...
1 comment:
Thursday, November 12, 2015

Beogram 8000: Replacing the Electrolytic Capacitors

›
I was asked to complete the exchange of the electrolytic capacitors in the Beogram 8000 that I am rebuilding right now. So I extracted the ...
1 comment:
Tuesday, November 10, 2015

Beogram 8000: Adjusting Horizontal Parallelism and Glueing the 3D Printed Plastic Tabs to the Carriage

›
The Beogram 8000 seems to like its new 3D printed plastic tabs that I implemented a few days ago . So I decided to epoxy them in place for ...
Friday, November 6, 2015

Beogram 8000: Repair of Broken Off Plastic Tabs on Tonearm Carriage with a 3D Printed Part (II)

›
Allright! After f ixing the broken off tab on the rear of the tonearm carriage of the Beogram 8000 that I am restoring right now, I came u...
Wednesday, November 4, 2015

Beogram 8000: Repair of Broken Off Plastic Tabs on Tonearm Carriage with a 3D Printed Part (I)

›
I finally got back to the Beogram 8000 that recently arrived from Japan. After fixing the spindle rotary encoder issue , I had to put this ...
Thursday, October 8, 2015

Beogram 8000: Not Responding to Keyboard Input - Not Working Rotary Encoder Feedback

›
A Beogram 8000 hailed from Tokyo in search for some TLC. It was initially purchased from ebay and supposed to be in excellent condition. On...