Pages

▼
Showing posts with label encoder. Show all posts
Showing posts with label encoder. Show all posts
Wednesday, September 21, 2016

Beogram 4002 (5501): Replacement of End Groove Detection Light Bulb with an LED

›
After restoring the RPM trimmer panel of the Beogram 4002 (5501) that I am rebuilding right now, it was time to look into the not working ...
Friday, February 26, 2016

Beogram 8002: Strange Behavior - After PLAY Arm Just Moves 2 cm, Then Stops

›
A Beogram 8002 from Australia arrived for some TLC. The problem at hand was that after pressing PLAY the arm just traveled in for about 2 c...
1 comment:
Wednesday, December 2, 2015

Beogram 8000: Replacing the Carriage Belt

›
Another loose end in the Beogram 8000 that I am readying for shipping I needed to attend to: I earlier noticed that the carriage belt was q...
Saturday, October 31, 2015

Beomaster 8000: Volume Encoder Damping Restoration - The Final Answer

›
The Beomaster 8000 that is currently on my bench had lost all damping of the volume rotary encoder wheel. This issue is more than a cosmeti...
Thursday, October 8, 2015

Beogram 8000: Not Responding to Keyboard Input - Not Working Rotary Encoder Feedback

›
A Beogram 8000 hailed from Tokyo in search for some TLC. It was initially purchased from ebay and supposed to be in excellent condition. On...
Wednesday, January 21, 2015

Beomaster 8000: Volume Wheel (Encoder) Damping - 3D Printed Paddle Wheel

›
This is a follow up to my last blog entry about restoring the damping of the Beomaster 8000 volume wheel rotation. Often, the volume encod...
Saturday, September 27, 2014

Beomaster 8000: Volume Wheel (Encoder) Damping - The Video

›
I really like my Beomaster 8000 with yesterday's volume wheel damping update ! So I decided to implement the same approach in the 8000 t...
Friday, September 26, 2014

Beomaster 8000: Volume Wheel (Encoder) Damping - Better Solution

›
*********Note: There is an update to this entry where a 3D printed part is used as paddle wheel to increase the interaction with the dampin...
Thursday, September 18, 2014

Beomaster 8000: Frequency Dial Not Working

›
Today one of my friends came over with his Beomaster 8000 in his arms...I restored this one a few years ago, so I felt responsible. The nice...
Saturday, September 6, 2014

Beomaster 8000: Volume Wheel (Encoder) Damping

›
********This is a historic post. Please, Check here for an updated procedure.****************** After the displays were back in the Beom...
Thursday, July 19, 2012

Beomaster Volume Encoder Repair

›
I finally got around to looking into the not-working volume wheel (encoder). I put a strong LED flashlight on it, and it worked. This told m...